Skip to content
Non-corrosion properties of stainless steels
Stainless steels are often rightly associated with corrosion resistance… but they can do much more! The examples in this document illustrate the usefulness of other properties of stainless steel long products.
Download this document
Published 08 November 2019
Tables of technical properties of stainless steels (flat products)
The selection of the appropriate stainless steel grade for each application is the result of various considerations. In order to assist you in this selection, Euro Inox mad the following technical information available:
- Chemical composition of stainless steels (flat products)
- Physical properties of stainless steels
- Mechanical properties of stainless steels (flat products)
Download the tables here
Published 08 November 2019
Magnetic properties of stainless steel
The magnetic attraction of ‘ferromagnetic’ ferritic martensitic and duplex stainless steels is compared to that of the low magnetic permeability austenitic types. Hard and soft ferromagnetic types are compared.
Source: British Stainless Steel Association
Download the paper here
Published 24 November 2020
High temperature resistance of stainless steel
Stainless steels are most commonly used for their corrosion resistance. The second most common reason stainless steels are used is for their high temperature properties; stainless steels can be found in applications where high temperature oxidation resistance is necessary, and in other applications where high temperature strength is required.
Source: AZO Materials
Read more here
Published 08 November 2019
Stainless steel for machining
Describes the standard grades of stainless steel that have been specially designed to improve machinability, including types 203, 303, 430F, 416 and 429F.
Source: Specialty Industry of North America
Open this document
Published 08 August 2023
Note on the sensitivity of stainless steel to strain rate
There is a growing interest for stainless steels in structural automotive applications. As a consequence, more questions are raised regarding the sensitivity of stainless steels to strain rate. This document attempts to summarize the published results for strain rates from 0,2 to 10%.
Source: Outokumpu
Download this paper
Published 08 November 2019
Fatigue properties of stainless steel lap joints
Spot welded, adhesive bonded, weldbonded, laser welded and clinched joints of stainless steel sheets – a review of their fatigue properties.
Source: Outokumpu
Download this document
Published 08 November 2019
General properties of steels
A table lists the typical properties of steels, including stainless steels at room temperature (25°C). The wide ranges of ultimate tensile strength, yield strength, and hardness are largely due to different heat treatment conditions.
Source: engineering Fundamentals
See the table here
Published 08 November 2019
Stainless steel for designers
ISSF has developed a brochure to provide a handy reference source to help engineers and designers to decide whether to use stainless steel, and, if so, which grade to use. The brochure has chapters dealing with a wide range of relevant topics, from abrasion resistance to fire resistance and further on to mechanical and physical properties. The publications to which it refers can be downloaded from links provided in the brochure.
Click here to download
Published 07 December 2020
